Unknown title

Unknown title

Know the sounds in the Alfa Romeo Stelvio

Brake and suspension noises on the Alfa Romeo Stelvio call for attention. Squeaking, scraping or knocking may be an innocent characteristic sound, but it can also indicate wear. If you recognise the sound in time, you may prevent extra damage and maintain reliable braking performance. Also see the overview of known Alfa Romeo Stelvio problems at /autoproblemen/autoproblemen-alfa-romeo/alfa-romeo-stelvio/. There you can read which warning signs you should not ignore.

Squeaking brakes Alfa Romeo Stelvio: what now?

Squeaking brakes on the Alfa Romeo Stelvio mainly occur at low speed, with cold brakes and light pedal pressure. The sporty setup of the braking system can play a role here. Brake pads that have to deliver a lot of braking force sometimes make more noise than pads that are aimed mainly at comfort.

A short squeaking noise therefore does not immediately mean the brakes are worn out. Brake dust, moisture and light rust on the brake discs can cause temporary noise after the car has been standing still. This often disappears after the brakes have been used a few times during normal driving.

Common causes of squeaking brakes

If the noise persists, a targeted inspection is sensible. Do not look only at the brake pads. The brake discs, callipers and mounting points can also be the cause.

Possible causes of squeaking brakes are:

  • Brake dust or dirt between the brake pad and the brake disc.
  • Light corrosion on the discs after rain or standing still.
  • Brake pads with a hard compound.
  • Unevenly or heavily worn brake pads.
  • Grooves or uneven wear on the brake discs.
  • A brake calliper that does not move freely.
  • Play in the brake pad or a mounting point.

Sometimes the brakes only squeak when braking gently. That fits with the characteristics of the braking system. If the noise gets louder or turns into scraping, have the brakes checked. A metallic scraping sound can mean that a brake pad has worn down too far.

When does brake noise point to a problem?

In addition to the noise, pay attention to vibrations, pulling to one side and a changed pedal feel. Together, these signals give the best indication. Does the steering wheel or brake pedal vibrate? Then the brake discs may be worn unevenly. The Stelvio may pull to one side during braking. In that case, a brake calliper may be sticking or the braking effect may differ between left and right.

Heat and smell also provide information. Check the wheels after a short drive. Is one wheel noticeably hot? Then a brake may be dragging. A burning smell also calls for a quick inspection. Do not continue driving if braking performance noticeably decreases or the pedal feels different.

These signs require immediate attention:

  • A grinding sound of metal on metal.
  • Vibrations while slowing down.
  • A longer stopping distance than usual.
  • Pulling to one side when pressing the pedal.
  • A burning smell or excessive heat at one wheel.
  • A warning light for the braking system.

Do not try to fix persistent squeaking yourself. Repeated hard braking is not a safe solution for this. Brakes can reach temperature through normal use. As a result, a light squeak sometimes disappears temporarily. That does not prove that all parts are in good order.

Suspension noises in the Stelvio when steering and over speed bumps

Suspension noises in the Stelvio usually sound different from brake noises. A dull knock or thud over a speed bump is more often a sign of bushes, mounts, anti-roll bar links or shock absorbers. A click while steering can also come from a ball joint or another moving part of the wheel suspension.

Pay close attention to the circumstances around the noise. Think about the speed, the driving movement and the road surface. Note at what moment you hear the sound:

  • When turning in.
  • When braking.
  • When accelerating.
  • When driving over small bumps.

Also note the speed. In addition, check whether the car is cold or warm.

Causes of suspension noises while steering

Rubbers and bushes connect different parts of the suspension. They also dampen movement. Wear can create play. Parts then move audibly under load. When steering or braking, the car’s weight shifts. That is when the noise can occur.

Common causes of clicking and knocking are:

  • Wear to bushes or control arm bushes.
  • Play in anti-roll bar links.
  • A worn ball joint.
  • A shock absorber or mounting with play.
  • Loose parts around the wheel.
  • Play between a brake pad and the calliper.

That last point can sometimes make diagnosis difficult. A brake pad with play can make a click when changing direction or at the first pedal press. It then sounds as if the noise is coming from the suspension, while the cause is actually in the braking system.

Solving braking and suspension problems on the Alfa Romeo Stelvio

A proper diagnosis involves clear steps. First, capture the noise. A workshop can then search more precisely. So describe clearly when the complaint occurs. Sometimes the source is not immediately obvious. In that case, have both the braking system and the suspension assessed.

The steps to take are:

  1. Listen to whether the noise is related to braking, steering or bumps.
  2. If possible, check the brake discs for grooves and uneven wear.
  3. See whether one wheel contains more brake dust than the other wheels.
  4. While driving, pay attention to vibrations, pulling to one side and a different pedal feel.
  5. Have the brake pads, discs, callipers and guide pins inspected.
  6. Then have the bushes, ball joints, anti-roll bar links and dampers checked.

With a brake calliper, the guide pins must also move smoothly. These pins allow the brake pads to contact the disc evenly. Seized guide pins often cause uneven wear and extra heat. The noise may also continue.

With squeaking brakes, a specialist can assess the compound of the brake pads. The installation of the brake pads also deserves attention. Contact points must be fitted correctly. They should also be treated with material that is suitable for the braking system. Products on the braking surface are unsafe and must never end up there.

‘ Have a persistent knock or scrape investigated mechanically without delay. ’

How to keep ride comfort at a good level

Regular checks help you spot minor deviations early. When changing tyres, check the visible condition of the brake discs. Also look at the brake pads and the parts around the wheel suspension. Always assess measured wear according to the correct specifications. Use the specifications for the relevant version for this.

Also take the driving conditions into account. With lots of short trips and urban driving, the brakes are not loaded for long periods. As a result, they have little time to reach temperature evenly. Rain and winter dirt can temporarily create more noise. The brakes can also make more noise after a long period of standing still. Always have a persistent knock or scrape investigated mechanically.

On the Carnews website you can find more information about Alfa Romeo and maintenance. You can also read about car problems and recognising technical issues. Discover the related articles. That way you can prepare better for maintenance and repairs to your car.

Frequently asked questions

The most common causes are the hard compound of the sporty brake pads, wear or uneven wear of pads and brake discs, and brake dust, dirt or light rust after rain or standing still. Sticking brake callipers or guide pins can also cause squeaking. With cold brakes, low speed and light braking, some squeaking can be a normal characteristic of the sporty braking system.

Worn anti-roll bar links usually produce a quick click or rattle over small bumps, especially when one wheel compresses independently. Worn control arms or control arm bushes more often cause a dull knock when braking, accelerating or steering, sometimes together with vague steering behaviour, pulling to one side or uneven tyre wear. Have the suspension checked unloaded for play in the links, ball joints and control arm bushes to identify the cause definitively.

Sporty driving places greater strain on the brakes through frequent hard braking and extra heat build-up, causing brake pads and discs to wear more quickly. High cornering speeds, sudden acceleration and driving hard over bumps also increase the load on shock absorbers, rubbers, bushes and anti-roll bar links. As a result, both the brakes and the wheel suspension may need maintenance or replacement sooner.

First check whether the creaking mainly occurs over speed bumps and uneven surfaces. Inspect anti-roll bar links, rubbers, bushes and shock absorbers for dirt, play or wear. Have worn or loose parts replaced; if the noise increases, vibrations appear or there is a clear knock, a professional inspection is sensible.