Frequently asked questions
On the 1.7 VTEC, especially at higher mileages, it is important to check whether the timing belt has been changed on time and whether the valve clearance has been set correctly; also look for oil consumption, leaks and ignition problems. The 2.0 i-VTEC has a timing chain, and rattling on a cold start may point to wear in the chain, tensioner or guides, especially after oil changes that have been left too long. On both engines, check for blue smoke, rough running, coolant loss and a documented service history.
Check all six seats individually for tears, sagging padding, loose trim and play. Operate each adjustment and lock several times and fold the rear seats fully down and back up again; everything should move smoothly and click firmly into place. Pay extra attention to the middle front seat and test all seat belts for smooth extension, retraction and locking. Squeaks, stiffness, excessive play or a lock that does not engage immediately point to wear or a faulty mechanism.
Inspect in particular the rear wheel arches and wheel lips, the underside of the sills and the jacking points. On a lift, also check the subframe, rear axle mountings, floorpan, spring seats and suspension mounting points. Also look for corrosion on the brake and fuel lines; fresh, thick underseal can hide rust or welding work.
Have the FR-V checked on a lift for play in the ball joints, wishbone bushes, anti-roll bar links and mountings, and inspect springs and shock absorbers for breaks, corrosion and leaks. Check all tyres for uneven wear, especially on the inner edges, as this may point to play or incorrect alignment. Then take a test drive over speed bumps and poor road surfaces, both unloaded and with extra weight, and listen for knocking, creaking, rolling, pulling or a crooked steering wheel. If in doubt, have an independent garage carry out a lift inspection and alignment measurement.
Inspection tips for a used Honda FR-V: before you buy, check rust, oil leaks, climate control and the suspension first. During a test drive, also listen for knocking and tapping. The six-seater can be a worthwhile purchase, but with an older car documented maintenance matters more than low mileage. A cold start and a look underneath can change your judgement.
What to look for when buying a Honda FR-V used
Start with the trim level and service history. The Honda FR-V has three seats in the front and three in the back. Check that all seats, belts and locks work properly; interior parts are not always easy to find. Also look at the Honda FR-V problem points before you arrange a viewing.
Ask for invoices rather than just stamps in a service book. Compare the mileage on the invoices. Put them alongside the readings on the inspection reports. Also check which engine you are looking at: with the 2.2 i-CTDi diesel, the exhaust manifold, turbo and clutch deserve extra attention. A short drive round the forecourt is not enough for that.
‘ A warmed-up engine can make starting problems and unusual noises less obvious. ’
Check rust and oil leaks first on a lift
On an older FR-V, corrosion can matter more than a minor engine fault. Inspect the rear wheel arches, sills and jacking points in daylight. Then, on a lift, have the underbody, brake lines and suspension mounting points checked. A fresh layer of black coating makes it harder to assess the condition of the metal. If the car has had welding work before, ask for invoices and photos taken before the repair.
Then look for oil leaks while the engine bay has not yet been cleaned. Check along the rocker cover, under the engine block and at the joint with the gearbox. Light grime is something different from fresh oil that gathers again after a drive. At the same time, inspect the coolant hoses and the area around the radiator for damp patches or dried residue.
Ask whether the seller will leave the engine cold. When starting, look out for prolonged cranking, rough idling and smoke that lingers. A warmed-up engine can make starting problems and unusual noises less obvious. If you suspect a leak, have the underside cleaned and checked again after a test drive before you decide.

The 2.2 i-CTDi calls for a targeted inspection
On the diesel, the smell of exhaust gases under the bonnet is a reason to keep looking. This is the sharp smell that normally comes from the exhaust. Some owners report cracks in the exhaust manifold of the 2.2 i-CTDi. So listen for a blowing or ticking noise on a cold start and look for black soot marks around the manifold. Ask for an invoice if this part has already been replaced.
Only assess the turbo properly during a longer drive. The engine should deliver pulling power smoothly, without sudden loss of power or a scraping noise. Watch for blue smoke and lots of oil around the intake hoses. Also listen for a whistling noise becoming much louder when the engine has to work hard. Have these signs investigated. A thin film of oil in an intake hose does not in itself prove turbo damage.
Also test the clutch and dual-mass flywheel. That flywheel dampens vibrations between the engine and gearbox. When idling, listen for a metallic rattle that changes when you press the clutch pedal. During the drive, accelerate in a high gear at low revs: if the engine speed rises without a matching increase in speed, the clutch may be slipping. Have shuddering when pulling away assessed as well.
Does the climate control work in every setting?
A warning light does not mean the air conditioning is cooling. First set the climate control to the lowest temperature and check whether cold air comes from all selected vents. Then switch to heating and try every fan setting. Look out for fluctuating airflow, unusual noises and a setting that does not respond.
Check this both when stationary and after a drive. See whether the electric cooling fan comes on when needed and whether the engine temperature remains stable. If in doubt, have the air conditioning system checked before agreeing a price: without diagnosis, you will not know whether the lack of cooling is caused by loss of refrigerant or a faulty component.
Immediately test each electric window from its own switch and from the driver’s door as well. Also check the tailgate lock, central locking and all dashboard warning lights when starting. The airbag and ABS lights should come on first and then go out. With the unusual seating layout, it is worth sliding and securing each seat individually.
‘ From the sound alone, you cannot pinpoint the faulty component. ’
Knocking during the test drive points to the suspension
An FR-V should not knock over small bumps. Drive over a speed bump and a stretch of rough road, preferably with the window slightly open. If you hear a tap or knock, have the anti-roll bar links, wishbones, ball joints and suspension mountings checked for play. From the sound alone, you cannot pinpoint the faulty component.
Before the drive, check all the tyres. Wear on the inner edge is easy to miss, yet it can point to incorrect wheel alignment or play in the suspension. Also inspect the springs for breaks and the shock absorbers for oil marks. When braking, the steering wheel should not vibrate noticeably and the car should not pull to one side.
Drive long enough to assess the drivetrain once it is warm too. Change through all the gears. On an empty car park, briefly drive with the steering wheel fully turned. Listen for clicks from the driveshafts. Then try a stretch of road at a steady speed. That way you can more easily tell whether noises depend on speed, load or steering angle.
Checklist for buying a used Honda FR-V
Work through the viewing in this order, so a tidy exterior does not distract you from more expensive faults:
- Compare the VIN, service invoices and mileage readings.
- Check the cold start and inspect the engine and gearbox for leaks.
- Inspect wheel arches, sills and underside for rust, preferably on a lift.
- Test all six seats, belts, windows and the climate control.
- Drive over uneven road surfaces and test the clutch, brakes and pulling power.
- Have any doubtful points assessed during an independent pre-purchase inspection.
The most common mistake is to blame one component immediately. Knocking is not automatically an anti-roll bar link, and an air conditioner that is not cooling does not necessarily just need topping up. Have the fault diagnosed and budget for the repair before you buy. Ask a Honda dealer, using the VIN, whether any recall is still open. Honda refers owners to the dealer for this.
A well-maintained FR-V deserves a careful inspection, not a quick glance at the mileage. On the Carnews website you will find much more about Honda, car problems and judging used cars. Find out which points matter for your next purchase.
Frequently asked questions
What specific points should be checked on the 1.7 VTEC and 2.0 i-VTEC engines in the Honda FR-V at higher mileages?
On the 1.7 VTEC, especially at higher mileages, it is important to check whether the timing belt has been changed on time and whether the valve clearance has been set correctly; also look for oil consumption, leaks and ignition problems. The 2.0 i-VTEC has a timing chain, and rattling on a cold start may point to wear in the chain, tensioner or guides, especially after oil changes that have been left too long. On both engines, check for blue smoke, rough running, coolant loss and a documented service history.
How do I check the condition of the complex six-seat layout and wear in the mechanical seat mechanisms?
Check all six seats individually for tears, sagging padding, loose trim and play. Operate each adjustment and lock several times and fold the rear seats fully down and back up again; everything should move smoothly and click firmly into place. Pay extra attention to the middle front seat and test all seat belts for smooth extension, retraction and locking. Squeaks, stiffness, excessive play or a lock that does not engage immediately point to wear or a faulty mechanism.
Which rust-prone areas of the chassis and wheel arches on the Honda FR-V need extra inspection during a pre-purchase check?
Inspect in particular the rear wheel arches and wheel lips, the underside of the sills and the jacking points. On a lift, also check the subframe, rear axle mountings, floorpan, spring seats and suspension mounting points. Also look for corrosion on the brake and fuel lines; fresh, thick underseal can hide rust or welding work.
How do I assess the suspension and wishbones for play, given the Honda FR-V’s higher weight and unique suspension layout?
Have the FR-V checked on a lift for play in the ball joints, wishbone bushes, anti-roll bar links and mountings, and inspect springs and shock absorbers for breaks, corrosion and leaks. Check all tyres for uneven wear, especially on the inner edges, as this may point to play or incorrect alignment. Then take a test drive over speed bumps and poor road surfaces, both unloaded and with extra weight, and listen for knocking, creaking, rolling, pulling or a crooked steering wheel. If in doubt, have an independent garage carry out a lift inspection and alignment measurement.







